For some time I have wanted to have a go at book binding. It seems like a great thing to do as a gift for a loved one, but maybe that’s just me. Well I decided to make my girlfriend a photo album and sketch book as a Christmas present. Hence why this is being published after Christmas to avoid her surprise being ruined. On the next occasion that I decide to make a book I would choose paper with a lower gsm that I have done for these. I selected 300 gsm, which is great for the photo album, however for the book it is a little too thick to easily flick the pages.
Anyway, to the book binding process. After having folded 20 sheets of paper I clamped them together in-between two other books (sheets of wood are better) and then coated the folded edges with Copydex, a latex based contact adhesive, and a cut of cloth placed over it. By doing this the Copydex soaks into the cloth and the paper to make a reasonably strong joint.
Now that the pages have been bound, its time to make the cover. Using 5mm rigid foam and sticky back cloth, I cut out the front, back and the spine and laid the parts out on the cloth. When doing this make sure to leave a large border of cloth which is used in the next step to cover the edges.
Alas I forgot to take enough photos but the next step is to fold the edges of the cloth up and over to cover the edges of the board. this can be a little tricky because of the sticky-ness but it looks good if you persevere.
In order to securely join the pages and the cover, we have to use a joining page which gets glued on the front and back cover, and the front and back of the stack of pages. Finally we are starting to look a bit more professional and are ready to glue in the pages.
Make sure to use a nice big weight when gluing in the pages just to make sure everything is nice and flat!
No photo’s of the finished book. Sad times.