PlotBot: Brief

So as time draws on we are getting closer to the start of the new academic year, and of course that means Fresher’s Fair!
At Kent we have several creative societies including SpaceSoc and their “Build a Rocket” sessions, Engineering Soc  with their focus on robotics, and TinkerSoc who want to help people build without limits.
With TinkerSoc it has become somewhat of a tradition to build and showoff a project at the fresher’s fair. In previous years we have had a laser engraver making custom name tags and furbies singing bohemian rhapsody, basically something to grab peoples attention and imagination.
Having seen a number of vertical plotters online I have decided now is the time to build one.

The standard vertical plotter is made up of 2 stepper motors, a servo, a motor controller and a microcontroller. By providing a stream of polar coordinates to the robot, the two motors can be wound in and out to move a pen across the whiteboard. This produces drawings where the pen never leaves the surface however that does not limit the styles of drawings that can be produced. Drawings can be developed further by adding a server or linear actuator to the pen carriage in order to push the pen off the drawing surface, thus allowing mush more freedom to implement different drawing styles.

Obviously we cannot draw above, or on either side of the motors, however the effectiveness of the plotter changes depending on the position of the pen carriage.
As such the most effective drawing area is a rectangle in the centre of the drawing surface with the tension on a cord being too low on either side, and the resolution is too low at the top due to the large angles. (http://2e5.com/plotter/V/design/

image

 

There have been a great many vertical plotters in the past, a great list can be found at plotterbot.com.
Overall there seem to be two different styles of drawing with vertical plotters.

Single line, where the pen never leaves the surface, is technically less challenging and can provide great results however you can be left with the odd scrawl across the surface that you didn’t want.

Multi line, where the pen can be lifted/pushed away from the surface, allows much more flexibility with regards to what can be drawn as the robot won’t scrawl connecting lines across the surface however does add the extra complexity of having a servo or linear actuator to push the pen carriage away from the surface.

Bearing in mind the saying, the more complex it is, the more likely it is to break.

 

Tinkerlog’s “Der Krizler” is definitely one of the more popular V-plotters out there, drawing on glass to amuse passers-by.

ATAT

 

Dan Royer’s Makelangelo is a very impressive V-plotter. Commercialised as a kit, it’s reliability has been tested extensively!

Makelangelo 2.5

 

And probably the oldest V-plotter around from 1988 developed at MIT using lego!

 

 

Advertisements

3 thoughts on “PlotBot: Brief

  1. First of all I would like to say wonderful blog! I had a quick question in which I’d like to ask if you do
    not mind. I was interested to know how you center yourself and clear your head before writing.
    I’ve had trouble clearing my mind in getting my ideas out.
    I truly do enjoy writing however it just seems like the
    first 10 to 15 minutes are usually lost simply just trying to figure out how
    to begin. Any ideas or hints? Appreciate it!

    • Hi there!
      I am glad that you enjoy the blog.
      To answer your question I too struggle to know where to begin, to such ends that a post normally takes me hours to write. You just have to keep on trying.

  2. Pingback: Building a Self Balancing Robot | Home of Student Hobby Electronics

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s